Technical Specifications - Grizzly ARM 2434 Lion Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
Defective units returned to us will be
disposed of for free.

Technical Specifications

Cordless
lawnmower .....................ARM 2434 Lion
Motor voltage
......................24 V
Idling speed ............................ 3400 min-1
Cutting circle ............................... 340 mm
Cut height ... 20 / 30 / 40 / 50 / 60 / 70 mm
Protection class ..................................... III
Protection type...................................IPX1
Weight ...........................................18.2 kg
Lawn bag volume ................................32 l
Sound pressure specification
(L
) ...........................83 dB(A); K
pA
Noise level specification (L
measured.................. 94 dB(A); K
guaranteed ................................. 96 dB(A)
Vibration (a
) ............. 1.4 m/s
h
Battery (Li-Ion .........................24LB4005
Nominal voltage ............................ 24 V
Energy ............................................. 86 Wh
Capacity.......................................... 4,0 Ah
Charging time ...................... approx. 7-9 h
Recharger ..............HYCHO 132400500G
Voltage
input ........... 100-240 V~, 50-60 Hz, 0.32 A
Voltage output..................24 V
Protection class ................................
Protection category............................ IP20
4.0 Ah
=3 dB
pA
)
WA
=2 dB
WA
; K=1.5 m/s
2
2
500 mA
II
Warning:
The vibration emission value may differ
during actual use of the power tool from
the stated value depending on the manner
in which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refe-
rences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid
GB
35

Publicité

Table des Matières
loading

Table des Matières