Operating - Medisana USC Mode D'emploi

GB
2 Useful Information / 3 Operating

3 Operating

3.1
Assambly
18
Accessories
There is no provision for combining with other devices.
Use only the original accessories with this device since only then
can safe operation be guaranteed.
Use a separate accessory set for each user to avoid cross-infection
or the transmission of harmful substances.
Leakage safety
When pouring the inhalant into the active ingredient tank
only fill it to the maximum mark (8 ml). The recommended filling
quantity is between 2 and 8 ml.
The MEDISANA USC is leakage proof. Do not, however, shake
the device when the active ingredient tank is full; there is a
chance that liquids could get into the electronics and destroy the
device.
Automatic limit stop
The device is equipped with an automatic limit stop: the device
switches off automatically after a short time if the inhalant is used
down to a very low residual quantity and there is hardly any or no
liquid in the active ingredient tank.
Do not operate the device if the active ingredient tank
empty.
The device also switches of automatically if the inclination of 45 °
is exceeded in any direction.
1. Place the nebulizer unit
ingredient tank
gold contact electrodes face down.
2. Now place this combined module on the base of the device, so
that the white catches on the left and right click into place.
3. Put on the cover
all four catches.
4. Put in the batteries.
on the attachment on the active
and lock it by turning it clockwise until the
so that it too audibly clicks into place on
,
is