Ugur UFR 370 SD Guide D'emploi page 51

D- USING YOUR PRODUCT
Defrosting
Your product has manual defrost.
If there is excessive frost deposit on the shelves of your device, this will lead decrease in the cooling capacity
and increase in energy consumption.
If the frost deposit and its thickness are high, place the products inside of your device to another suitable
environment that prevents them to get spoiled.
Unplug your product. Frost deposit generally melts in two (2) hours.
Place a container at water discharge for preventing the melted ice waters to damage the floor.
After defrosting operation, wipe internal walls with a dry cloth to make sure that they are not wet.
Run your device empty again for three (3) hours and wait for it to cool down. Then you can place your foods-
tuff in it.
EN
51