Attaching The Grilles; Specifications - Yamaha NS-C500 Mode D'emploi

ATTACHING THE GRILLES

The speaker and the grilles are packed separately. To attach
the grilles, line up the projections (magnets) on the reverse
side of each grille with their corresponding screw heads on
the speaker.
Notes
• When removing the grilles, be careful not to touch the drive
units, and not to exert excessive force with any tools.
• Do not touch or apply impact to the speaker's diaphragm.
Otherwise, the speaker may malfunction.
• There are magnets on the reverse side of the grille. Do not
place the grille close to objects that might be affected by
magnets, such as CRT TV, clock, magnetic card, diskette,
etc., after removing it.

SPECIFICATIONS

Type ............... 2-way acoustic suspension speaker system
Non-Magnetic shielding type
Driver ............................. 12 cm (4-3/4") cone woofer × 2
3 cm (1") aluminum dome tweeter
Impedance .................................................................. 6 
Frequency Response .............. 55 Hz to 50 kHz (–10 dB)
Nominal Input Power ............................................. 40 W
Maximum Input Power .........................................160 W
Sensitivity ............................................... 87 dB/2.83 V/m
Crossover Frequency ...........................................4.1 kHz
Dimensions (W×H×D) ................... 445 × 158 × 159 mm
(17-1/2" × 6-1/4" × 6-1/4")
Weight ............................................. 4.7 kg (10 lbs. 6 oz.)
* Specifications subject to change without notice due to
product improvements.
* A speaker cable is not included with this model.
Advanced PMD
DC diaphragm
100 kHz (–30 dB)
5
En