Plasma Duo - Mitsubishi Electric MSZ-FA25VA Notice D'utilisation

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
To change the air flow direction not to blow directly onto your body.
To change the air
When to use this function?
flow direction
Pressing and hold- Use this function if you don't
VANE
want the air from the indoor
ing the button
unit to blow directly onto your
for 2 seconds or
body.
more causes the
• Depending on the shape of
horizontal vane to
the room, the air may blow
reverse and move
directly onto your body.
to horizontal posi-
VANE
• Press the button
tion.
again to return the vane to
the previously-set position.
Horizontal
position
NOTE:
• If you make the air flow not to blow directly onto your body by pressing
minutes even during the operation of the air conditioner.
• The air conditioner operates with decreased air flow until the compressor turns on again.
I
To change the AIR FLOW blowing direction horizontally, press the
Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence:
SWING OPERATION
Use the swing operation for the air flow to reach all corners of the room.
10
COOL/DRY HEAT
The air conditioner starts the The air conditioner starts heat-
cooling or drying operation ing operation approx. 3 minutes
approx. 3 minutes after the after the vane has moved to the
vane has moved to the hori- horizontal position.
zontal position. • Sometimes
VANE
around your feet may not
• When the button is
warm. To warn the area
pressed again, the vane
around the feet, set the
returns to the previously-
horizontal vane to
set position and the air
(AUTO) or the downward-
conditioner starts the cool-
blowing position.
ing or drying operation in
VANE
• When the
approx. 3 minutes.
pressed again, the vane re-
turns to the previously-set
position and the air condi-
tioner starts heating opera-
tion in approx. 3 minutes.
VANE
button, the compressor stops for 3
button.
(SWING)
PLASMA DUO... PLASMA DEODORIZING & PLASMA
AIR PURIFYING
Use the PLASMA operation when you want to remove odor (cigarette smell, etc.) or clean the air (get rid of dust, pollens or
other allergens) inside the room.
the area
button is
Description of PLASMA operation:
< function>
Both PLASMA DEODORIZING and PLASMA AIR PU-
RIFYING operation works.
< function>
The PLASMA DEODORIZING operation cleans the air
inside the room by adsorbing and decomposing the par-
ticles of odor-releasing substances and gases such as
formaldehyde.
< function>
The PLASMA AIR PURIFYING operation cleans the air
inside the room by adsorbing the particles of cigarette
smoke or allergens such as pollens and house dust.
NOTE:
• Carbon monoxide released from cigarettes cannot
be removed by PLASMA operation. Open the win-
dows to let the outside air in from time to time.
• During PLASMA operation, you may smell ozone
that is generated in small quantities from the
PLASMA DEODORIZING/AIR PURIFYING filter
units. This is not a malfunction.
• You may hear a small "hissing" sound during
PLASMA operation. This is the sound of plasma
discharge, and not a malfunction.
To start PLASMA operation:
I
Select the operation mode of PLASMA by pressing the
ton during the operation of air conditioner.
Each time this button is pressed, the operation mode of PLASMA is changed in
sequence:
→ → → Cancel (The sign of PLASMA operation disappears.)
PLASMA/WASH lamp turns on in the display section of the indoor unit and
PLASMA DEODORIZING and/or PLASMA AIR PURIFYING unit is energyzed.
Adjust the air flow to your desired speed.
To release PLASMA operation:
I
Select the "Cencel" by pressing the
eration of the air conditioner.
Once the PLASMA operation is selected, PLASMA operation will be performed
every time the air conditioner is turned on until the "Cancel" is selected with the
button.
Never touch the PLASMA DEODORIZING/AIR PU-
RIFYING filter units during the operation of the air
conditioner. Although the filter units are safety-con-
scious design, touching the units could be the cause
of trouble as they discharge high voltage electricity.
<Cleaning>
When the PLASMA/WASH lamp blinks, please clean the
PLASMA DEODORIZING/AIR PURIFYING filter units. Please
refer to page 13 for the cleaning instructions.
<Replacing the PLASMA DEODORIZING filter>
* Refer to "REPLACEMENT OF THE PLASMA DEO-
DORIZING FILTER..." on page 13.
but-
button during the op-