Programming For; Programming For And - Sharp XE-A213 Manuel D'instructions

s
(2) Press the
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
6. Position of decimal point programming (Press
(1) Enter the position of decimal point from right using
numeric key.
The position of decimal point from right can be set
from 0 to 3.
Default setting is 2.
s
(2) Press the
7. Terminate programming
A
(1) Press the
programming.
Item:
A Open rate entry
B Preset rate entry
C TAB (position of decimal point from right)

Programming for

X
The key is used as an example below.
r
Programming for
1. Specify the key to program.
X
(1) Press the
Immediately after displaying "CH1 PROGRAMMING",
guidance message for the next step will be displayed.
2. Text programming (Press
:
(1) Press key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
58
key to register the setting.
key to register the setting.
V
key to terminate the
r o X
, ,
o
and , the step 3 and 4 are skipped.
X
key to enter programming.
s
to skip. / Press
s
to skip. / Press
key
Selection:
Enable*
Disable
Enable*
Disable
Y c b
, , and
Key operation
A
to terminate.)
s
TAB
A
to terminate.)
2
s
ENTER[TL/NS]KEY
A
Print
Text Rate
Print:
0
1
0
1
0-3 (default:2)
Operator display
X
CH1 PROGRAMMING
ENTER[00]KEY
:
ENTER TEXT
CHECK1
2
2
0.00
From left, ABC