Sharp XE-A213 Manuel D'instructions page 55

s
(2) Press the key to register the amount.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
4. Sign programming (Press
(1) Go to (2) when the sign does not need to be
changed from "(-)". Otherwise, press
display "(+)".
:
Each time key is pressed, the display shows
"(+)" and "(-)" alternatively.
Choose "(-)" for discount and "(+)" for premium.
Default setting is "(-)".
s
(2) Press the key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
5. Discount calculation (for the items) programming (Press
(1) Go to (2) when the discount calculation for the items
does not need to be changed from "ITEM
ENABLE". Otherwise, press
"ITEM DISABLE".
:
Each time key is pressed, the display shows
"ITEM DISABLE" and "ITEM ENABLE" alternatively.
Default setting is "ENABLE".
s
(2) Press the key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
6. Discount calculation (for the subtotals) programming (Press
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
"SBTL DISABLE".
:
Each time key is pressed, the display shows
"SBTL DISABLE" and "SBTL ENABLE" alternatively.
Default setting is "ENABLE".
s
(2) Press the key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
s A
to skip. / Press
:
key to
:
key to display
:
key to display
1 2 3
FOR THE MANAGER
Part Part Part
to terminate.)
s
to skip. / Press
s
to skip. / Press
s
SIGN
s
ENTRY FOR ITEM
ITEM ENABLE
A
to terminate.)
s
ENTRY FOR SBTL
SBTL ENABLE
A
to terminate.)
s
LIMIT DIGITS
(-)
8
53