Connecting Antennas; Fm Wire Antenna; Am Loop Antenna; Using External Antennas - Pioneer SX-315 Mode D'emploi

Connecting up

Connecting antennas

Connect the AM loop antenna and the FM wire antenna
as shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below). Always make sure that the receiver is switched off
and unplugged from the wall outlet before making or
changing any connections.
FM wire
SX-315
antenna
ANTENNA
DIGITAL INPUT
(COAXIAL)
FM
UNBAL STB
75Ω
AM
LOOP
AUDIO
TV IN
IN
OUT
R

FM wire antenna

Connect the FM wire antenna and fully extend along a
window frame or another suitable place that gives good
reception.

AM loop antenna

Assemble the antenna and connect to the receiver.
Attach (if necessary) and face in the direction that gives
the best reception.
If you want to attach the loop antanna to a wall, assemble
as shown below.
Antenna snap connectors
Twist the exposed wire strands together and insert into
the hole, then snap the connector shut.
3/8 in.
(10mm)
AM loop
antenna
DVD/DVR
(OPTICAL)
DIGITAL
SPEAKERS
FRONT SUB
CENTER
R L WOOFER
+
–
L

Using external antennas

To improve FM reception
Connect an external FM antenna.
One-touch
ANTENNA
PAL-connector
FM
UNBAL
75Ω
75Ω coaxial cable
AM
LOOP
To improve AM reception
Connect a 15–18 ft. (5–6 m) length of vinyl-coated wire to
the AM antenna terminal without disconnecting the
supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
ANTENNA
FM
UNBAL
75Ω
AM
LOOP
Loop antenna
Outdoor
antenna
15–18 ft.
(5–6 m)
Indoor antenna
(vinyl-coated wire)
02
9
En