Greencut PP560L Manuel D'utilisation page 43

All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine. Check all the documentation, packaging and product labels before using it.
If you encounter a situation not described in this manual use common sense to use the machine as safely as possible and,
if you see any danger, do not use the machine.
USERS
• This machine has been designed to be manipulated only by users of legal age who have read and understood
these instructions.
• Familiarize yourself with this machine before using it. Make sure you know the controls and safety devices and
how they should be used.
• If you are an inexperienced user, we recommend that you do some practice doing simple jobs and, if possible, in
the company of an experienced person.
PERSONAL SAFETY
• Do not use this machine for other purposes other than those for which it has been designed.
• Do not force this machine. A correct use for the type of work to be done will allow you to work better and more
safely.
• Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective protections or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components is damaged.
• Do not use this machine if the switch does not change between "ON" and "OFF". Any power tool that can not
be controlled with the switch is dangerous and must be repaired.
• Do not use this machine when you are tired or under the influence of drugs, alcohol or medication.
• If the machine vibrates in an unusual way stop it, remove the battery and inspect the machine for the possible
cause and repair it. If you can not find the reason, contact Authorised Service Centre.
• The machine must be placed horizontally on a stable and levelled surface, without a steep slope.
• Remove all keys or hand tools from the work area before starting this machine.
• Keep your feet firmly on the ground and keep your balance at all times. Sliding or unstable surfaces can cause a
loss of balance and control of the machine.
• Keep all body parts away from the blade. Do not remove the cut material or hold the material to be cut when
the blades are moving.
• Make sure the switch is OFF when clearing jammed material.
• Store the product with the battery disconnected and out of the reach of children.
WORKWEAR
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothes away from moving parts.
Loose clothes, jewellery or long hair can be caught by moving parts. Use:
-
Eye and hearing protection.
-
Long trousers.
-
Head and face protection
-
Hand protection (resistant and non-slip gloves).
-
Foot protection.
• Protective equipment such as a dust mask, safety gloves, non-skid safety boots and a hard hat will reduce the
risk of personal injury.
43
EN