Warm Keeping; Setting Up The Cooking Time - Philips Avance HD3198 Mode D'emploi

Selecting already saved
MyRecipe
MyRecipe (
1
At standby mode, touch and hold
the multi-stage cooking button
(MyRecipe) for 3 seconds. (fig. € )
» "F1" displays on the screen.
2
Touch the increase (+) or decrease
(-) button to select one of previously
saved MyRecipe settings: F1, F2, F3,
F4 or F5 (fig.  ).
3
Touch and hold the start button
(On/Off) for 3 seconds to confirm
and start cooking (fig. i ).

Warm keeping

The multicooker provides you with easy
control over the keep-warm mode.
• After you have selected the cooking
function using the menu button
(Menu), if you start the cookign
process directly, the keep-warm
indicator will light up. After the
cooking is finished, the multicooker
will switch to keep-warm mode
directly.
• After you have selected the cooking
function using the menu button
(Menu), if you touch the keep-warm
button (Chaud) first, and then start
the cooking process, the keep-warm
indicator will be off. After the cooking
is finished, the multicooker will be in
standby mode.
Note
• At standby mode, you can touch the
keep-warm button (Chaud) to switch to
warm keeping.
• In keep-warm mode, you can touch the
keep-warm button (Chaud) to switch to
standby.
Setting up the cooking
) settings
time
You can adjust the cooking time for
some menus. Refer to the chapter
"Menus Overview" and see the cooking
time regulating range of different menus.
1
2
3
4
5
6
Select the cooking menu you need.
Touch the cooking time button
(Temps de cuisson) (fig. ƒ ).
» The hour unit flashes on the
screen.
Touch the increase (+) or decrease
(-) button to set the hour unit
(fig. „ ).
After the hour unit is set, touch the
cooking time button (Temps de
cuisson) again (fig. ... ).
» The minute unit flashes on the
screen.
Touch the increase (+) or decrease
(-) button to set the minute unit
(fig. † ).
Touch and hold the start button
(On/Off) for 3 seconds to confirm
the cooking time and start cooking
(fig. i ).
EN
17