Troubleshooting; Hotline - GlobalMIND VeinWalker pro Mode D'emploi

Troubleshooting

Your VeinWalker
...the cuffs are not pumped up completely
Before use, make sure that the tubes are securely attached to the valves and
connected correctly to the control device.
Check whether the directional switch for the pump is set to
"infl ate"
...Check whether the pressure regulator pump is set to "maximum".
...the cuffs are not emptied completely or not quickly
enough:
Check whether the directional switch for the pump is set to
"defl ate".
Check whether the pressure regulator pump is set to "maximum".
On page "Important tips, How to get started" and page
30
Walker pro", is an exact description of how you should use your VeinWalker
©

Hotline

Should you have questions about the product, you can contact us from Mon-Fri by
calling the following service number: +49 (0) 38851 314337 (subject to charges).
pro is easy to use, but in case...
©
We wish you a pleasant and successful treatment!
34
"Operating your Vein-
31
pro.
©