Kuppersbusch IKE3180-1 Notice D'utilisation page 28

28
Hc
11. Open the appliance door and the kitch-
en furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and
the furniture door and mark the holes.
Remove the small squares and drill
holes with ø 2 mm at 8 mm from the
outer edge of the door.
Place the small square on the guide
again and fix it with the screws sup-
plied.
8 mm
Hb
Ha
Ha
12. Align the kitchen furniture door and the
appliance door by adjusting the part
Hb.
Hb
13. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to the
cabinet.
• The door opens and closes correctly.