VESTEL PDM-49UG02 Manuel D'utilisation page 15

Speakers
DP Stream
Setting (*)
Smart Remote
Quickstandby
Signage Settings Menu Contents
Set ID
OSD Orientation
Software upgrade
Serial number
Model name
Save model
information
Clone to USB
Clone from USB
Internal USB
operations
Video Wall Settings
Power Up Mode
Quick Standy
OPS Settings
Copy app cache
from USB
Scheduler Settings
To hear the Display audio from the connected compatible audio device set as
Amplifier. You can use the remote control of the Display to control the volume of the
audio device.
Sets the DisplayPort stream type.
(*) This menu item appears only when the input source is set to DP.
Press OK to open the Smart Remote menu screen. Using this screen you can discover
and connect the remote controller devices to your Display wirelessly.
If this feature is enabled the Display can be turned on again with the RS232 and Lan
commands if it is turned off through it. Press Left or Right button to enable or disable
the feature.
Sets the device ID. You can select a value between 0-100 using the numeric buttons
on the remote in order to identify your Display.
Sets the OSD (On Screen Display) rotation of your Display. Landscape and Portrait
options are available.
Displays current software version. Press OK to see the Upgrade options menu. You
can use these options to start a manual search for software updates and set your
automatic scan preference.
Displays serial number of the unit. (Cannot changed by user)
Displays model name of the unit. (Cannot changed by user)
Copies the model information data of the unit to a connected USB device.
Copies the database files from the unit to a connected USB device.
Copies the database files from a connected USB device to the unit.
Copies files from internal USB to the unit. Only available when internal USB device is
connected.
Press OK to open the Video Wall Settings menu screen. Row Count, Column Count,
Cell and Offset options are available.
Configures the power up mode preference. Last state, Always on and Standby
options are available.
If this feature is enabled the Display can be turned on again with the RS232 and Lan
commands if it is turned off through it. Press Left or Right button to enable or disable
the feature.
Press OK to open the OPS Settings menu screen. Three sub-menu options are
available.
OPS Information: Displays read-only information about the OPS unit, if supported.
OPS Status: Displays whether the OPS module is on or off. Allows the change of
status via soft PSON signal (0.5s)
Powerdown: Turns the OPS off via hard PSON signal (5s)
Note: This menu will not be available if OPS is not supported or not connected to the unit.
Copies app cache data from a connected USB device to the unit.
Note: This feature may not be available depending on the model of your unit.
Press OK to open the Scheduler Settings menu screen. Set the Scheduler option
as On by using the Left/Right directional buttons. Using the sub-menu options you
can set the unit to turn on automatically at defined time with the defined input source
setting. It can also be set to turn off at defined time. If the Source option is set as Last
State, the input source will not be changed at the power-up. If the Source option is set
as USB, the media files in the connected USB device will be played back automatically
as explained in the section entitled 'USB Auto Play Feature'.
English - 14 -
MST and SST options are available.