Display Menu Contents - VESTEL PDM-49UG02 Manuel D'utilisation

Display Menu Contents

System - Picture Menu Contents
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Advanced Settings
Dynamic Contrast
Noise Reduction
Colour Temp
Picture Zoom
Movie Sense
Film Mode
RGB Gain
HDMI Full Range
PC Position
Autoposition
H Position
V Position
Dot Clock
Phase
Reset
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture
Settings while in PC mode.
You can change the picture mode to suit your preference or requirements. Picture mode can
be set to one of these options: Text, Game, Sports, Signage and Natural.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. The backlight function will be inactive if the
Energy Saving is set to an option other then Custom.
You can change the dynamic contrast ratio to desired value.
If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce
the amount of noise.
Sets the desired colour temperature value. Cool (1300K), Normal (9300K) and Warm
(8500K) options are available.
Sets the desired image size format.
Press left/right buttons to set Movie Sense to Low, Medium, High or Off. While Movie Sense
is active, it will optimize the Display's video settings for motional images to acquire a better
quality and readability. When Movie Sense option is set to Low, Medium or High, Movie
Sense demo option will be available. If one of these options is selected and if you press OK
button, then the demo mode starts. While demo mode is active, the screen will be divided
into two sections, one displaying the movie sense activity, the other displaying the normal
settings for Display screen.
Note: This feature may not be available depending on the model of your unit.
Films are recorded at a different number of frames per second. Turn this feature on when you are
watching films to see the fast motion scenes clearly.
Adjust the strength of the red, green and blue colors. You can use this feature for fine
adjustment of white balance in the picture.
While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.
Appears only when the input source is set to VGA/PC.
Automatically optimizes the display. Press OK to optimize.
This item shifts the image horizontally to the right hand side or left hand side of the screen.
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Depending on the input source(computer etc.) you may see a hazy or noisy picture on the
screen. You can use phase to get a clearer picture by trial and error.
Resets the picture settings to factory default settings (except Game mode).
English - 12 -