C: Setting Custom Functions - Canon MACRO RING LITE MR-14EX II Mode D'emploi

C: Setting Custom Functions

#
C.Fn-01:
When the MR-14EX II is not operated for approx. 90 seconds, the power
turns off automatically to save energy. You can disable this function.
0: ON (Enabled)
1: OFF (Disabled)
When the temperature of the flash unit rises due to continuous flash firing
etc., the time until auto power off takes effect may become longer.
$
C.Fn-02:
0: % (Enabled (Depth-of-field preview button))
Press the camera's depth-of-field preview button to fire the modeling
flash.
1: & (Enabled (Test firing button))
Press the MR-14EX II's test flash button to fire the modeling flash.
2: ' (Enabled (with both buttons))
Press the camera's depth-of-field preview button or the MR-14EX II's
test flash button to fire the modeling flash.
3: OFF (Disabled)
Disables the modeling flash.
When 3/1/4/7/2 timer on the camera is operating, firing
modeling flash with test flash button is not possible.
(
C.Fn-03:
You can set whether or not to cancel FEB automatically after shooting three
shots with FEB.
0: ON (Enabled)
1: OFF (Disabled)
(Auto power off)
(Modeling flash)
(FEB auto cancel)
61