Identification Plate - SDMO RES 9.5 EC Manuel D'installation

2.2.4 Identification plate

Generating sets and their components are identified by means of identification plates.
The description of the plates is as follows:
(18)
(3)
(9)
(1) Backup power in kW using natural gas
(2) Current in A
(3) Frequency in Hz
(4) Voltage in V
(5) Power factor
(6) Backup power in kW using liquid propane
(7) Speed of rotation in rpm
(8) Number of phases
(9) Alternator insulation class
(10) Reference altitude
(19)
SDMO Industries
12,bis rue de la Villeneuve - CS92848 - 29228 Brest Cedex 2 - France
Tél (33) 02 98 41 41 41 - Fax (33) 02 98 41 63 07 - www.sdmo.com
MODEL: RES13
SPEC
(7)
HZ: 50
(4) (2) (8)
Voltage Amps
230 40.4
GEN. MODEL:
INSUL. NEMA CLASS H, 40°C AMB.
KW VARIES WITH BTU CONTENT OF FUEL
Bar code (material number)
MATL:
(18)
(6)
(10)
(19)
Figure 2.4: Description of the identification plate
(15)
SERIAL: xxxxxxxxx
(14) BUILD DATE MM/YY
RPM: 3000 FUEL: Natural gas
(1)
Phase KW
1 9.3
Bar code (serial number)
(2)
(11)
(16)
(11) Generating set weight in Kg
(12) Degree of protection IP
(13) Starter battery voltage
(14) Month and year of manufacture
(15) Serial number
(16) CE conformity marking
(17) GOST-R conformity mark
(18) Generating set model
(19) Manufacturer details
(20) Performance class
8/73
(5)
KVA P.F.
- 1
(13)
BATT. 12 V
(12)
(20)
(17)