Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Menu Item
Description
[Cutoff]
[Subwoofer]
Select enable or disable rear subwoofer output from this
product.
[Front HPF]
Adjust the speaker output level of the listening position by
touching [+]/[-].
[Rear HPF]
[Subwoofer LPF]
[EQ]
Select or customize the equalizer curve.
[Super Bass] [Powerful]
Select a curve that you want to use as the basis of
[Natural] [Vocal] [Flat]
customizing then touch the frequency that you want to
[Custom]
adjust.
TIPS
• If you make adjustments when a curve [Super Bass], [Powerful],
[Natural], [Vocal], or [Flat] is selected, the equalizer curve settings
will be changed to [Custom] mandatorily.
• [Custom] curves can be created common to all sources.
• If you trail a finger across the bars of multiple equalizer bands,
the equalizer curve settings will be set to the value of the
touched point on each bar.
[Volume]
Adjust the volume level by touching [+]/[-].
[Main Volume] [Ring
Volume] [Talking Volume]
[Navi Volume] [Voice
Volume] [TA Volume]
[Speaker Level]
Adjust the speaker output level of the listening position.
1
Types of speaker
Touch
[Front Left] [Front Right]
level.
[Rear Left] [Rear Right]
NOTE
[Subwoofer]
[Subwoofer] is available when [Subwoofer] in the [Cutoff] setting is
activated.
[Loudness]
Compensates for deficiencies in the low-frequency and
[Off] [Low] [Mid] [High]
high-frequency ranges at low volume.
[Bass Boost]
Adjust the bass boost level.
[0] to [6]
Camera settings
The menu items vary according to the source.
A separately sold rear view camera is required for utilizing the rear view camera function.
(For details, consult your dealer.)
22
En
or
to adjust the selected speaker output
▶Rear view camera
This product features a function that automatically switches to the full-screen image of
the rear view camera installed on your vehicle when the shift lever is in the REVERSE (R)
position.
Camera View mode also allows you to check what is behind you while driving.
TIP
The parking assist guidelines can be displayed temporarily on the rear view camera screen by touching
the icon at the top left of the screen. The guidelines can be adjusted. For details on how to adjust the
guidelines, see [Parking Assist Guide Adjust] (page 23).
▶Camera for Camera View mode
Camera View can be displayed at all times. Note that with this setting, the camera image
is not resized to fit, and that a portion of what is seen by the camera is not viewable.
To display the camera image, touch [Camera] on the top menu screen (page 7).
NOTE
To set the rear view camera as the camera for Camera View mode, activate [Back-up Camera Input]
(page 22).
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen
image may appear reversed.
• Immediately verify whether the display changes to the rear view camera image when the shift lever is
moved to REVERSE (R) from another position.
Menu Item
Description
[Back-up Camera Input]
Setting rear view camera activation.
[Camera View]
Select the way the screen image of a camera appears.
[Normal] [Reverse]
[Parking Assist Guide]
You can set whether to display the parking assist
guidelines on the rear view camera images when backing
up your vehicle.
Publicité
Chapitres
Table des Matières
