Sony BRAVIA XBR-75X800G Manuel De Référence page 16

XBR-75/65X800G only
1
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
2
Remove one side of the Table-Top Stand at a time. Firmly hold the Table-Top Stand
securely with both hands while the other people lift up the TV.
3
Repeat the previous step and remove the other side of the Table-Top Stand.
Note
• Three or more people are required to detach the Table-Top Stand.
• Be careful not to use excessive force while detaching the Table-Top Stand from the TV as it may cause
the TV set to fall resulting in personal injury or physical damage to the TV.
• Take care when handling the Table-Top Stand to prevent damage to the TV.
• Be careful when lifting the TV as the Table-Top Stand is detached, the Table-Top Stand may topple
over and cause personal injury.
• Take care when removing the Table-Top Stand from the TV to prevent it from falling over and
damaging the surface that the TV is sitting on.
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on
the TV.
• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the
TV with the LCD panel facing down.
16
US
Wall-Mount Bracket
(not supplied)
Screw (not supplied)