The Tv - Sony BRAVIA XBR-75X800G Manuel De Référence

Detaching the Table-Top Stand from the TV
XBR-49/43X800G only
1
To detach the Table-Top Stand from the TV, remove the screws.
Note
• Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on

the TV.

• Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the
TV with the LCD panel facing down.
• When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the
original holes on the rear of the TV.
• Place the TV with its screen facing down on a level and stable surface covered with a thick and soft
cloth when removing the Table-Top Stand from the TV to prevent damaging the surface of the LCD
display.
2
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Wall-Mount Bracket (not supplied)
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
14
US
Screw (not supplied)