Names And Functions Of Parts (Remote Control); Dimmer Button - Teac TASCAM 202MKVII Mode D'emploi

a
b
c
o When the main unit and the remote control both have but-
tons with the same functions, this manual explains how to
use one of the buttons . The other corresponding button can
be used in the same manner .
12

Names and functions of parts (remote control)

d
e
c
a

DIMMER button

Press to change the brightness of the display .
b
PARALLEL REC (parallel recording) buttons
These buttons start simultaneously recording to both TAPE 1
and TAPE 2 . Press both buttons at the same time (page 24) .
c
TAPE 1 and TAPE 2 operation buttons
RTZ button
Press to return the tape to the "
stop (page 17) .
COUNTER RESET button
Press to reset the tape counter to "
RECORD (0) button
Use when recording .
Press both buttons at the same time to start recording standby
(page 18) .
REC MUTE (record muting) button
Press while recording to record about four seconds of silence
(page 20) .
PAUSE (9) button
Press to pause playback/recording .
Press again to resume playback/recording .
Rewind/fast-forward (m/,) buttons
Use these buttons to rewind/fast-forward .
STOP (8) button
Press to stop playback, recording, rewinding or fast-forwarding .
PLAY (y) button
Press to start cassette tape playback .
Press to resume playback/recording when it is paused .
d
REPEAT button
This allows repeat playback of a selected section of the tape
(page 18) .
e
DUB START (dubbing start) buttons
This will start dubbing at normal speed . Press both buttons at
the same time (page 23) .
o Dubbing from TAPE 2 to TAPE 1 is not possible .
o Dubbing at high speed is not possible .
" counter position and
" .