Back Panel - Yamaha MusicCast VINYL 500 Mode D'emploi

|
Before you start Parts and their functions

Back panel

14
En
SERVICE jack
This jack is only for service. It is not normally used.
NETWORK jack
Use a LAN cable (commercially available) to connect this to your network.
WIRELESS switch
Enables/disables this unit's wireless functionality (including Bluetooth).
AUTO (default): Wireless functionality is enabled.
OFF: Wireless functionality is disabled.
LINE OUT jacks
Output the playback audio from the record or the network source.
( page 18)
Audio output select switch
Switches the audio output. ( page 18)
LINE OUT (default): The signal from the cartridge is amplified by the
phono equalizer that is built into this unit, and is
output from the LINE OUT jacks.
PHONO OUT: The signal from the cartridge is output directly from the
PHONO OUT jacks.
PHONO OUT jacks
These jacks output the playback audio of the record. ( page 19)
DC IN jack
Connect the AC adaptor (included) to this jack. ( page 18)