Whirlpool W11183136A Instructions Pour L'installation page 27

ALL DOORS:
12.
Reinstall inner door assembly
Bottom
of door
Position the door with the inside of the door facing up. Using
a Phillips screwdriver, reinstall the 10 screws removed earlier,
securing the inner door to the outer door.
13.
Reinstall door on dryer
Doors with electrical wiring: Pull the wire through the front
panel opening before reinstalling the door.
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the
four T25 ® screws removed earlier.
DOORS WITH ELECTRICAL WIRING:
14.
Reconnect wiring
Swing
down
Plug in wire. Using a Phillips screwdriver, secure the rotating
assembly to the hinge with the screw removed earlier.
27