Brinkmann 810-7452-F Notice D'utilisation page 27

Step 8
Place hose heat shield on the two
pre-attached bolts, then slide down
into locked position. Tighten bolts
securely.
Step 9
Attach side table front panel to side
table. Align pre-attached bolts in
front panel with keyholes in side
table, then slide left into secure
position. Tighten bolts securely.
Step 10
Attach side burner front panel to
side burner assembly. Align
pre-attached bolts in side burner
front panel with keyholes in side
burner assembly, then slide right
into secure position. Tighten bolts
securely.
26