Software Update; About Data Protection - NEFF T16TS7KN Série Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
hotplates to the hob.
Notes
Before you can change the basic settings, the hob
must be switched off.
If the appliance is being operated by means of the
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
When the appliance is delivered, the settings
transmission option is already activated by default.
If the settings transmission option has been
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
Touch the
symbol for 4 seconds.
U
1.
The product information will be displayed.
Touch the
symbol repeatedly until the
U
2.
•'...
setting appears.
To activate the settings transmission option, select
3.
the value
with the twist knob. To deactivate the
settings transmission option, select the value
Confirming settings
As soon as cooking settings are transmitted to a
cooking zone, the cooking zone display, timer display
or modified function starts, depending on the setting. To
confirm these settings, touch the twist knob in the
appropriate area for the cooking position required. To
discard the settings, touch any other button on the hob.

Software update

Using the software update function, your hob's software
can be updated (e.g. for the purpose of optimisation,
troubleshooting or security updates). To do this, you
need to be a registered Home Connect user, have
installed the app on your mobile device and be
connected to the Home Connect server.
As soon as a software update is available, you will be
informed by the Home Connect app, from which you will
also be able to download the update.
Once the update has been successfully downloaded,
you can start installing it via the hob (basic settings,
setting) or the Home Connect app if you are on
•'†
your local area network.
The Home Connect app will notify you once installation
is complete.
Notes
You can continue to use your hob as normal while
updates are downloading.
Depending on your personal settings in the app,
software updates can also be set to download
automatically.
We recommend that you install security updates as
.
soon as possible.

About data protection

When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
Security certificate of the WiFi communication
module (to ensure a secure IT connection).
The current software and hardware version of your
domestic appliance.
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note: Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
Home Connect
en
65

Publicité

Table des Matières
loading

Table des Matières