Follett E-ITS100-31 Manuel D'utilisation page 6

Breaking ice bridges
I
t may be necessary to use the paddle to break up ice bridges that occur along the sides and in the middle of
the bin. This often happens if ice has been held in storage for a period of time without use. use supplied paddle
accessory to break up bridges.
Do nOT dig up at ice. Instead, break away "legs" that are holding bridges. Ice above will then
!
fall.
To avoid injury, do not attempt to break up bridged ice through upper windows or hopper
shutter door. A falling ice bridge can cause paddle to lift. Keep head and face away from
paddle handle to avoid injury.
1. Completely knock down all ice from sides and back
of bin.
2. Knock down any bridge that has occurred in
middle.
3. Agitate paddle back and forth to break up
congealed ice mass.
SmartGATE ice shield operation
SmartGATE ice shield can be adjusted and locked
at one of several levels to accommodate flow
characteristics of different types of ice.
Bin is shipped with SmartGATE ice shield in full down
position. SmartGATE ice shield can be raised and
locked in higher position for better flow or when more
access is needed.
6