Kenwood ProTalk TK-3301 Mode D'emploi page 30

■ Scan
Press this key to start scanning the transceiver channels.
Priority Scan: The Priority channel is a channel that is
given first priority to while scanning. The Priority channel is
set by your dealer.
Revert Channel: During Scan, pressing the PTT switch will
automatically select the transceiver's Revert channel and
you will begin transmitting. Your dealer can program the
Revert channel using one of the following methods:
• Selected
• Selected + Talkback
• Priority
• Priority + Talkback
■ Scan + Temporary Delete
Press this key to start scanning the transceiver channels.
When Scan pauses at an undesired channel, you can
remove that channel from the scanning sequence by
pressing and holding this key for 3 seconds.
■ Scrambler
The Scrambler function allows you to hold a conversation in
complete privacy. When the Scrambler function is activated,
any other party that is listening to your channel will be
unable to understand your conversation.
■ Squelch Off
Momentarily press this key to hear background noise. Press
the key again to return to normal operation.
■ Squelch Off Momentary (Side 2 key default)
Press and hold this key to hear background noise. Release
the key to return to normal operation.
■ Temporary Delete
When Scan pauses at an undesired channel, you can
remove that channel from the scanning sequence by
pressing and holding this key for 1 second.
20