Makita DCL181F Manuel D'instruction page 7

Disposing of dust for normal filter
1. In order to drop dust sticking on the filter in the
capsule, tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
► 1 . Capsule 2. Suction inlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
2. Remove accumulated dust from inside of capsule
and off of prefilter.
1
► 1 . Prefilter 2. Capsule
3. Twist prefilter in direction of arrow to unfasten
securing lip from cleaner unit and then pull off prefilter.
1
► 1 . Prefilter 2. Securing lip
4.
filter, and lightly tap to dislodge dust.
1
1
► 1 . Prefilter 2. Filter
Disposing of dust for high
2
performance filter
1.
capsule, tap the capsule 4 or 5 times with your hand.
Now point suction inlet downwards, turn capsule in
direction of arrow in diagram, and disconnect capsule
slowly and straight.
2
► 1 . Capsule 2. Suction inlet
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
2.
and off of high performance filter.
2
► 1 . Capsule 2. High performance filter
7 ENGLISH
Clean out fine dust from prefilter. Next, remove
In order to drop dust sticking on the filter in the
Remove accumulated dust from inside of capsule
1
2
1
2
2