Hapro Luxura X5 Mode D'emploi page 13

Replacing the Xsens (option) cans
If you purchased an Xsens I set, you can replace an empty can with a full one.
1.
If you purchased an Xsens III set, you can replace an empty can with a full one (A). There must always be 3 cans connected.
If you wish to install fewer than 3 cans (B), you must disconnect the supply hose to the can and install the optional plug (P). Always place full cans as far as
possible to the left (position 1). In the parameter menu, set the number of full cans that are present by selecting '06 - Xsens'
A
1.
1 2 3
Changing SoundAround (option) memory cards
You can replace your SmartVoice card with a di erent SmartVoice card.
You can place your own music on the Studio 1 and Studio 2 cards. Only use the supplied memory cards.
2. 3.
2. 3.
Studio 2
Studio 1
SmartVoice
'02 - Number of Xsens cans' .
B
P
13