Transporting/Storage - Honda Power Products F220 Manuel De L'utilisateur

9. TRANSPORTING/STORAGE

Transporting
If the tiller has been used, allow it cool for at least 15 minutes before
loading it on the transport vehicle. A hot engine and exhaust system
can burn you and can ignite some material.
To prevent fuel spillage, drain the fuel when transporting the tiller, turn
the engine switch to the OFF position, and keep the tiller level.
Take care not to drop or strike the tiller when transporting.
Loading and unloading
If a suitable loading ramp is not available, two people should lift the
tiller on and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie
the tiller down with rope or straps. Keep the tie-down rope or straps
away from the controls, adjustment levers, cables, and the carburetor.
The handlebar can be folded either front or back so the tiller will take
up less space (see page 24).
Fold to the back side. Fold to the front side.
40