Tiller Operation - Honda Power Products F220 Manuel De L'utilisateur

6. TILLER OPERATION

Adjusting the handle position
The handle position should be adjusted to suit the stature of the
operator and work condition.
To adjust the handlebar height, loosen the handlebar height adjuster,
select the appropriate holes and tighten it.
HANDLEBAR HEIGHT ADJUSTER
Clutch operation
The clutch engages and disengages the power from the engine to the
transmission.
Engage:
1.Push and hold the lock lever.
2.Squeeze the clutch lever.
3.The clutch is engaged, release the lock lever.
Disengage:
Release the clutch lever.
PUSH
ENGAGED
ENGAGED
LOCK LEVER
DISENGAGED
CLUTCH LEVER
DISENGAGED
24