Honda Power Products F220 Manuel De L'utilisateur page 40

4.Set the collar to the spring, and position them between the right side
of the clutch lever and the handle bracket (see page 36).
With the spring and collar set in this position, slide in the lever
fulcrum pin.
5.Set the snap pin in the direction shown in the illustration (see page
36).
6.Check the lock lever and clutch lever for smooth operation.
If the lock lever and clutch lever do not operate smoothly, or the
clutch engages by squeezing the clutch lever without pushing the
lock lever, take the tiller to your servicing dealer.
37