Honda Power Products F220 Manuel De L'utilisateur page 17

6.Engine oil level
CAUTION:
• Running the engine with insufficient oil can cause serious engine
damage.
• Be sure to check the tiller on a level surface with the engine stopped.
1.Remove the oil filler cap. Check the oil level with the level gauge
looking into the filler neck.
2.If the oil level is low, fill to the upper limit of the level gauge with the
recommended oil.
3.Screw in the filler cap securely.
Oil capacity: 0.30 L (0.32 US qt, 0.26 lmp qt)
Recommended oil
Use 4-stroke motor oil that meets or
exceeds the requirements for API service
category SE or later (or equivalent).
Always check the API service label on the
oil container to be sure it includes the letters
SE or later (or equivalent).
SAE 10W-30 is recommended for general
use. Other viscosities shown in the chart
may be used when the average temperature
in your area is within the indicated range.
CAUTION:
Using nondetergent oil or 2-stroke engine oil will shorten the engine's
service life.
OIL FILLER CAP
14
UPPER LIMIT
AMBIENT TEMPERATURE
LOWER LIMIT