Dyson Supersonic Mode D'emploi page 6

this appliance must not be
supplied through an external
switching device, such as a timer,
or connected to a circuit that is
regularly switched on and off by
the utility company, or plugged
into any socket where the electrical
supply is unstable or likely to be
turned off.
9. For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable.
10. Do not use the appliance for any
other purpose than drying hair.
11. Do not handle any part of the plug
or appliance with wet hands.
12. Do not unplug by pulling on
the cable. To unplug, grasp
the plug, not the cable.
The use of an extension cable is
not recommended.
13. Do not stretch the cord or place
the cord under strain. Keep the
cord away from heated surfaces
and do not wrap the cord around
the appliance.
14. Do not use any lubricants, cleaning
agents, polishes or air fresheners
on any part of the appliance.
15. Contact the Dyson Helpline when
a service or repair is required.
Do not disassemble the appliance
as incorrect reassembly may result
in an electric shock or fire.
16. If the appliance is not working as it
should, has received a sharp blow,
has been dropped, damaged,
6
04.05.2018 07:56 - C93987_HD02_OPMAN_EU_X583-PRO-O