Sedus black dot Mode D'emploi page 9

F Depth of the seat (optional)
Adjusting the seat depth:
P
hold it fast Push the cushion to the desired position
2.
Release the finger plate, and the seat will engage
3.
G Adjusting the basic armrests
(optional)
To adjust the height of the armrests:
P
hold the button Raise or lower the armrest to the
2.
desired height Release the button to lock the armrest
3.
C G
Press the finger plate and
1.
Press and
1.
F
D
A
H Adjusting the 4D armrests
(optional)
To adjust the height of the armrests:
P
hold the button Lift or lower the armrest to the
2.
desired height Release the button to engage the
3.
armrest
To adjust the depth of the armrests:
P
hold the button Push the armrest cover backwards
2.
or forwards to engage
To swivel the armrest: up to 24° inwards and
P
12° outwards
To adjust the sitting width between the armrests:
P
Slightly loosen the lever on the armrest support
1.
under the seat. Position the armrests
2.
the lever
I Adjustment of the headrest (optional)
Push the headrest to the desired height
P
(it is continuously adjustable)
Adjust the tilt of the headrest as desired
P
Height of the footring (optional for counter under-
frame version)
Adjusting the footring:
P
anticlockwise – the footring loosens
ring to the desired position
screw clockwise
Press and
1.
Press and
1.
Retighten
3.
Turn the knurled screw
1.
Move the foot-
2.
Tighten the knurled
3.
English 9