Yamaha RM-WAP-8 Mode D'emploi page 12

2.
Plug the LAN cable into the Dante/PoE port.
NOTICE : Use STP (Shielded Twisted Pair) cable to prevent electromagnetic interference.
: When disconnecting the LAN cable from the Dante/PoE port, wait at least
five seconds before reconnecting the cable. Otherwise, damage or malfunctions
may result.
NOTE
: We recommend using single-pair Ethernet cables in order to stabilize power
supply via PoE.
: If necessary, route the LAN cable through the cable slots.
3.
Attach a commercially available safety wire.
4.
Align the hooks on the mounting bracket with the mounting cutouts
(holes) in this unit.
Hook
12
RM-WAP-8 Owner's Manual
Mounting
cutouts