Removing Sawdust Generated During Use; Prevention Measures For Users; Personal Safety Measures; Compliance With Safety Measures And Warnings - Kunzle & Tasin Bona Belt UX Manuel D'utilisation Et De Maintenance

Commencing Operation (Cont.)

Removing sawdust generated during use

Sawdust can ignite spontaneously and cause injury or
damage. It must be disposed of appropriately. Always empty
the sawdust into metal containers which are located outside
the building.
Sawdust can ignite spontaneously and cause injury or
damage. Empty the contents of the dust bag when it is 1/3 full.
Empty the dust bag at the end of each machine use. Never
leave the dust bag unattended when it contains sawdust. Do
not empty the contents of the dust bag above a fire.

Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when
using the sanding machine. Always wear a dust mask of at
least class P2, when using the sanding equipment.
The eyes and/or body may suffer injury if personal safety
clothing is not used. It is adviceble to wear safety goggles,
protective clothing during sanding operations.
16
Bona Belt UX Manual
For minimized dust environment use a vacuum cleaner
intended for wooden dust.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use ENISO approved ear
protectors (earmuffs) during sanding operations.
Prevention Measures for Users (Cont.)

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings
tightly closed. Maintain machine settings in accordance with
the specifications.
Failure to comply with instructions on this machine and
in this manual may cause serious injury and/ or damage.
Read and comply with all safety instructions. Ensure that all
plates, labels, warnings and instructions are secured to the
machine. New plates can be obtained from an authorized
Bona /Kunzle & Tasin dealer.

Instructions on Correct Machine Use

Read this manual carefully and become familiar with the machine.
The equipment is suitable for industrial use (e.g. in hotels, schools, hospitals, offices, factories and shops).
The following information highlights particularly hazardous situations for the operator and/or machine. Understand when these
conditions may be present. Removing safety features could cause death or physical injury. Take all steps necessary to instruct
personnel who may use the machine. Report any damage on the machine or incorrect operation immediately.
1) Keep hands and clothes away from rotating parts.
2) Keep hands on the handle when the motor is operating.
3) DO NOT leave the machine unattended when the motor is operating.
4) Always use the machine with the dust bag in the correct position.
5) DO NOT detach the dust bag when the motor is operating.
6) Always disconnect the power supply cable from the machine before performing maintenance.
7) Transport the machine with care due to the heavy weight of the individual parts making up the machine.
8) Always use the machine in well-ventilated areas.
9) Always keep the work area well-lit.
10) Always dispose of the sawdust appropriately.
11) Use the type and amount of abrasive specified in the instruction manual.
12) The use of accessories other than those recommended in this manual may cause injury.
13) The machine is for indoor use only.
Bona Belt UX Manual
Injury or damage may occur if maintenance operations or
repairs are carried out by any unauthorized
personnel.
EN
17