With Two People; Introduction; Safe And Correct Use - Kunzle & Tasin Bona Belt UX Manuel D'utilisation Et De Maintenance

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Transporting and Handling (Cont.)
With one person (cont.)
7.
Loosen the handle (A) and remove
the tube (B) from its housing and
take it to the work area.

With two people

Transporting the machine with two people? Proceed as follows:
1.
One operator should clasp the handle grip...
10
Bona Belt UX Manual
8.
Lift the base frame by clasping
the front and back. Bring
the belt guard to the edge and
take it to the work area.
2.
...The second, holding the lift
handle, will lift the machine.
Transporting and Handling (Cont.)
With two people (cont.)
This equipment is not to be used by anyone (children included)
with physical or mental disabilities, or anyone without the
relevant experience and knowledge, unless they have received
instructions on using the equipment and are supervised by a
responsible person to ensure their safety.

Introduction

Safe and correct use

This instruction manual should be read carefully before
using the Bona
®
BELT UX wood flooring sander for the
first time.
The instruction manual contains important information on
safety and preventing improper use of the machine and will
resolve any doubts or questions, making it possible to operate
the machine safely and with ease.
If a situation arises which has not been described in this manual, contact your distributor or
Bona
®
Representative.
The Bona
BELT UX wood flooring sander is suitable for the
®
dry sanding of wood floors. Any other use without the consent
of the manufacturer is prohibited. DO NOT use on wet floors.
See 'Prohibited use' on page 18.
Bona Belt UX Manual
Children must be supervised to ensure that they DO NOT play
with the machine.
Removing safety features could cause death or physical
injury. Familiarize yourself with the machine before using
it for the first time.
Keep hands and clothing away from moving mechanical parts.
The work area is protected via the base frame and the mobile
cover on the abrasive drum.
EN
11

Publicité

Table des Matières
loading

Table des Matières