Trolling Speed Check And Adjustment - Yamaha WaveRunner XLT800 Manuel D'entretien

INSP
ADJ
1
FUEL SYSTEM
2. Inspect:
G Water separator 1
Water accumulation → Drain.
NOTE:
If need the water draining, remove the drain
plug 2.

Trolling speed check and adjustment

1. Check:
Trolling speed
G
Out of specification → Adjust.
Trolling speed:
1,300 ± 50 r/min
Checking steps (with the watercraft in
the water):
Start the engine and allow it to warm
G
up for several minutes.
Attach the engine tachometer to the
G
spark plug lead.
Engine tachometer:
YU-8036-B/90890-06760
G Measure the engine trolling speed.
2. Adjust:
Trolling speed
G
Adjustment steps:
Start the engine and allow it to warm
G
up for several minutes.
Attach the engine tachometer to the
G
spark plug lead.
Engine tachometer:
YU-8036-B/90890-06760
G Turn the remote throttle stop screw 1
in or out until the specified trolling
speed is obtain.
3-9
E