Mounting The Charger; Charging The Battery - West Marine VHF155 Guide D'utilisation

customer service to order a replacement (see the back
cover page for contact information).
5) Install the alkaline battery case in your radio just as
you do the Li-Ion battery (see page E-15).
WARNING! The case is designed to prevent the
accidental charging of alkaline batteries. Never
use alkaline batteries in the radio without the
battery case. Do not attempt to modify the battery
case design.

Mounting the Charger

You can mount the charger on any flat surface.
1) Use the two holes at the base of
the charger as a template to mark
the drill holes.
2) Using a 1/8-inch (or 3 mm) drill
bit, drill two holes 1/2 inch (13mm)
deep.
3) Use the provided screws to attach
the charger to the surface.

Charging the Battery

Your radio includes a charger and a
rechargeable battery pack. Place
your radio in the charger with the
display facing forward. Make sure
that the CHARGE LED on the
charger turns orange.
West Marine VHF155 Radio Owner's Manual
E-17