Explanation Of The Pictograms On The Machine - Baier BDB 819 Traduction Du Mode D'emploi Original

EN
2.6.8 Explanation of the pictograms
on the machine
The CE mark on a product means that the
product conforms with all the applicable
European regulations and has been
subjected to the prescribed conformity
assessment procedures.
Protection class I equipment
The machine is insulated in such a way
that it has no exposed metal parts that
could be live in the event of a fault. An
additional safeguard becomes active if the
basic insulation fails.
Environmentally friendly disposal of
waste equipment
Waste equipment contains valuable
recyclable materials which should be
reused or recycled. Batteries, lubricants
and similar materials must not be allowed
to get into the environment.
Therefore, please dispose of waste
equipment through suitable collection
systems.
Wear hearing protection!
The typical A-weighted sound pressure
level of this power tool is over 85 dB (A)
– wear ear protectors when working with
the tool!
Read the instruction manual!
Before starting any work with or on the
machine, this instruction manual, the
safety instructions and the warnings must
be read through carefully and observed.
| 38 |