Using And Handling The Power Tool; Service; Machine-Specific Safety Instructions; Operating Personnel Requirements - Baier BDB 819 Traduction Du Mode D'emploi Original

2.4 Using and handling the power
tool
a) Do not overload the tool. Use the intended
power tool for your work.
You work better and safer within the given power
range if you use the suitable power tool.
b) Do not use a power tool whose switch is
defective.
A power tool which can no longer be switched
on or off is dangerous and must be repaired.
c) Remove the plug from the plug socket and/
or remove the battery before carrying out
tool adjustments, changing accessories or
placing the tool aside.
This precautionary measure prevents
unintentional starting of the power tool.
d) Store power tools out of the reach of
children when not in use. Do not allow
people to use the tool unless they are
familiar with it, or if they have not read this
instruction manual.
Power tools are dangerous if they are used by
inexperienced people.
e) Maintain power tools with care. Check
whether moving parts are in proper working
order and do not jam, whether parts are
broken or damaged in such a way that they
impair the function of the power tool. Have
damaged parts repaired before using the
tool.
Many accidents are caused by poorly serviced
and maintained power tools.
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
g) Use the power tool, accessories, insert
tools, etc. in accordance with this
instruction manual. Take into consideration
the working conditions and the work to be
carried out.
Use of power tools for other than the intended
applications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in
unforeseen situations.
2.5

Service

a) Have your power tool repaired by qualified
personnel only and use original spare parts
only.
This will ensure that the safety of the power tool
is maintained.
2.6 Machine-Specific Safety
Instructions
2.6.1 Operating personnel
requirements
•
People below the age of 18 may not use the
machine.
•
The operating personnel must be familiar
with the content of this instruction manual.

2.6.2 Workplace safety

•
Secure the work area also behind openings
and cutouts.
Unsecured work areas can endanger you and
other people.
•
Watch out for open and concealed electricity
cables, and water and gas pipes. Use
suitable detectors to find concealed utility
pipes and cables, or contact the local utility
company for advice.
Contact with electricity cables can cause fires
and an electric shock. Damage to a gas pipe
can cause an explosion. Penetrating a water
pipe causes damage to property or could cause
an electric shock.
•
Do not use the power tool near flammable
materials.
Sparks could ignite these materials.
•
Avoid causing situations where other people
can stumble or trip.
Tripping over cables can cause serious injuries.
•
Secure the workpiece.
A workpiece securely held in clamping devices
or a vice is more safely held than in the hand.
•
Avoid dust accumulation in the workplace.
Dusts can easily ignite.
•
Ensure adequate ventilation in closed
rooms.
Risk due to dust and impaired vision.
| 33 |