Kemper MINI-TRESOR Instructions D'installation Et D'utilisation page 7

EN
Note! The valve must be attached
minimum 250 mm over the
maximum of operating water surface.
Note! In some countries the use of
combination units with water and
electric is not permitted. Please follow
the specific regulations for the relevant
country, if you want to install the
product outside of Germany.
Note! In case of assembly the Tresor
in swimming pools or facilities with
compareable ambient conditions, a
regular cleaning of the complete Tresor
is necessary as described before.
Danger! According to VDE requirements
KEMPER MINI-TRESOR for power and
water connection have to fuse by a
residual current circuit breaker (residual
current 0,03A). This applies to all sockets
in outdoor area.
Disposal
Local regulations on waste recycling and
disposal must be followed. The product
must not be disposed of with household
waste but must rather be disposed of
appropriately.
Description
1 Surface-mounted wall cabinet (basic body)
2 4 attachment screws and 4 spacers
3 Frost-proof outer fitting or hose bibb
4 2 attachment screws (M6 x 12)
5 Socket to fit selected Figure type
6 Mounting plate with attachment clasp
7 Wing-screws
8 Spray protection plate
9 2 attachment screws (M6 x 12)
10 Door lock with 3 keys
© www.kemper-olpe.de – 11.2021 / K410021300001-00 – 7 /24