Setting The Operating Temperature; Led Indicators And Control Panel - Beko FNE 1000 Manuel D'utilisation

Setting the operating
temperature
4
LED indicators and control
panel
There are three coloured indicator
lights located on the front of the
appliance which shows the operating
mode of the freezer.
Green Indicator (1): Illuminates
when the appliance is connected to
the mains and will glow as long as
electricity is available. The green light
will not glow if the thermostat is set
to '0' position. The green indicator
does not give any indication of the
temperature inside the freezer.
Amber Indicator (2): This indicator
will glow when the fast freeze switch
is on and will continue to glow until
the fast freeze switch is turned off.
The compressor will run continuously
while fast freeze switch is on. Fast
freeze operation is for freezing fresh
food.
2 3
Red Indicator (3) Illuminates:
) If the pre-set temperature can not
a
be maintained.
) If excessive amounts of fresh food
b
are placed inside.
) If the appliance door is left open
c
accidentally.
Thermostat knob (5) Thermostat
knob is located on the indicator light
set.
IMPORTANT: When you press the
fast freeze switch, there may be a
short delay before the compressor
starts to operate. This is normal and
does not indicate a compressor fault.
15
EN
1 5