Olimpia splendid UNICO EASY S1 Mode D'emploi page 42

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 59
41. Clean the appliance with a damp cloth; do not use abrasive products or
materials. See the appropriate paragraph for the filters cleaning.
42. The most common cause of overheating is dust or lint deposit in the
appliance. Regularly remove these accumulations by disconnecting the
appliance from the power socket and vacuuming the grids.
43. Do not use the appliance in environments subject to significant
temperature changes as condensation could form inside the appliance
itself.
44. Install the appliance at at least 2 meters from other electronic devices
(TV, radio, computer, dvd player, etc.) in order to avoid disturbances
(Fig.2).
45. Do not use the appliance if insecticide gas has just been sprayed in the
room or in the presence of burning incenses, chemical vapours or oily
residues.
46. Do not use the appliance if the filters are not positioned correctly.
47. Disassembly, repair or reconversion performed by an unauthorized
person could cause heavy damages and will cancel the manufacturer
warranty.
48. Do not use the appliance in case of malfunctioning or faults, if the cord or
plug are damaged, or if it has been dropped or damaged in any manner.
Turn the appliance off, disconnect the plug from the socket and let it be
checked by professionally qualified personnel.
49. Neither disassemble nor modify the appliance.
50. Repairing the appliance by yourself is extremely dangerous.
51. If you no longer wish to use this appliance, it must be made inoperative
by cutting the power supply cable after removing the plug from the power
socket. Hazardous parts of the appliance must be rendered harmless,
especially as there is a risk of children playing with it.
52. Do not use tools different from those recommended by the manufacturer
for the defrosting process and for the appliance cleaning.
53. The appliance is equipped with a thermal protector which preserves the
circuit board in case of over-temperature. If this safety device intervenes,
disconnect the plug from the power socket and wait for the appliance to
completely cool down (at least 20÷30 minutes) and then reconnect the
plug to the power socket and restart the appliance.
If the appliance doesn't restart, disconnect the plug from the power
socket and contact an Assistance Centre.
EN - 8

Publicité

Table des Matières
loading

Table des Matières