Troubleshooting Guide; Specifications - Panasonic Technics SP-10R Manuel D'utilisation

Troubleshooting guide

Before requesting service, make the below
checks. If you are in doubt about some of the
check points, or if the remedies indicated in the
chart do not solve the problem, contact your
dealer.
No power
z Is the AC mains lead plugged in?
¨Plug the mains lead in firmly. ( 16)
z Is the control unit connected with the main
unit?
¨ I nsert the control unit connection cable
until it clicks. ( 16)
No indication on the display of the
control unit
z Is the power plug connected?
¨Insert it firmly. ( 16)
z Is the power on?
¨ P ress the power button to turn on the
power. ( 18)
z Is the display dimmer activated?
¨ O perate a button (any button other than
the power button) on the control unit.
( 22)
24
(24)
English
Error code
„
Occurrence of an error will be notified as
necessary on the display of the control unit and
with the speed selector button indicators of the
main unit.
Display of
the control Measure
unit
Check that the control unit is
Unconnected connected with the main unit.
( 16)
Consult your dealer.
z One of the [33/45/78] speed
selector button indicators of
F58 the main unit blinks (rapidly
F76 or slowly) in orange.
F17 z Provide the displayed
number and the LED's
blinking status at the time of
consultation.
(Example of the display of the control unit in
case of an error)
Unconnected
START ・ STOP
(Example of the speed selector button
indicators of the main unit in case of an error)
Flashes in orange.
33 45 78

Specifications

General
Power supply AC 110-240 V, 50/60 Hz
Power consumption 10 W (Power ON)
0.05 W (Power OFF)
Dimensions <Control unit>
(W×H×D) 110×84×350 mm (4-
<Main unit>
365×109×365 mm (14-
Mass <Control unit>
Approx. 2.1 kg (4.7 lbs)
<Main unit>
Approx. 18.2 kg (40.2 lbs)
Operating 0 °C to 40 °C
temperature range (32 °F to 104 °F)
Operating humidity range 35 % to 80 % RH
(no condensation)
Turntable section
Drive method Direct drive
Motor Brushless DC motor
Turntable Brass and Aluminum die-cast combined
Diameter: 323 mm (12-
Mass: Approx. 7.9 kg (17.5 lbs)
(includeing the turntable sheet)
Turntable speeds 33-1/3, 45 and 78* rpm
Variable range pitch ±16 %
Starting torque 0.39 N·m (4.0 kg·cm) / 3.47 lb-in
Braking system Electronic brake
Wow and flutter 0.015 % W.R.M.S.
(JIS C5521)
Terminal section
Output terminal Earth terminal
Specifications are subject to change without notice.
* The turntable speed will be 78.26 rpm when set to 78 rpm (pitch control 0.0%).
×3- ×13- )
11/32 5/16 25/32 inch
×4- ×14- )
3/8 5/6 3/8 inch
)
23/32 inch
(25)
English
25