Connections With External Device - Pioneer SBX-300 Mode D'emploi

Note
• Some TVs have settings for digital audio output. For
details, see the operating instructions for your TV.
• Set audio output from the built-in speakers of the
TV to OFF. If this cannot be set, set the TV volume
to the minimum level.
Connections with
external device
You can connect a playback device (BD, DVD,
or CD player) with an optical digital audio
output or a satellite broadcast tuner or other
device with a coaxial digital audio output to the
unit to enjoy the sound of that device.
Rear of unit
IR OUT
TV BD/DVD STB ANALOG
TV BD/DVD
Optical digital audio cable (commercially
available)
BD player or other device
Satellite broadcast tuner,
cable TV tuner,
or other device
Digital audio pin cable (commercially available)
Note
• An optical digital audio cable with a square plug
can be connected to this unit.
• When an MPEG2-AAC (digital broadcast) signal is
input to a digital audio input terminal, sound not
be output.
If sound is not output, switch the audio output of
the device connected to the digital audio input
terminal to PCM.
For the switching procedure, refer to the operating
instructions for the connected device.
• Some connected devices have settings for the
digital audio output. For details, see the operating
instructions for the specific playback device.
AC IN
IR OUT
STB ANALOG
Installing and Connecting the Unit 11
En