Safety Instructions - Haussmann LS15-20 Guide De L'utilisateur

SaFETY INSTRUCTIONS

1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust.Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power
tool. Distractions can cause you to lose control.
2. Electrical safety
a) Always use a grounded three-wire extension cord and
receptacle that are made of rubber and intended for outdoor
use. The machine is designed to operate on 120 V AC
household current. The log splitter power cord has a grounding
prong. To avoid the possibility of shock it must always be used with
a properly grounded three-prong receptacle protected with a 20A
fuse. Never remove the ground prong from the plug.
b) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
c) Handle the cord carefully. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from heat,
oil, sharp edges and moving parts. Damaged or entangled cords
increase the risk of electric shock.
d) If operating a power tool in a damp location is unavoidable,
use a Ground Fault Circuit Interrupter (GFCI) protected supply.
Use of a GFCI device reduces the risk of electric shock.
e) When operating a power tool outside, use an outdoor
extension cord marked "Wa" or "W". These cords are rated for
outdoor use and reduce the risk of electric shock.
f) Do not use the equipment close to flammable objects.
3. Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while you
are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in
serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the
off-position before connecting to power source, picking up
or carrying the tool. Carrying power tools with your finger on the
switch or plugging in power tools that have the switch on invites
accidents.
3