Haussmann LS15-20 Guide De L'utilisateur page 5

d) Remove any adjusting key or wrench before turning the power
tool on. A wrench or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in moving parts.
4. General Safety Rules
a) Know your power tool. Read the operator's manual carefully.
Learn the applications and limitations as well as the specific
potential hazards related to this tool.
b) Guard against electrical shock by preventing body contact
with grounded surfaces. For example: pipes, radiators, ranges,
refrigerator enclosures.
c) Keep guards in place and in good working order.
d) Remove adjusting keys and wrenches. Form habit of checking
to see that keys and adjusting wrenches are removed from tool
before turning it on.
e) Keep work area clean. Cluttered areas and benches invite
accidents. DO NOT leave tools or pieces of wood on the tool while
it is in operation.
f) Do not use in dangerous environments. Do not use power tools
in damp or wet locations or expose to rain. Keep the work area well
lit.
g) Keep children and visitors away. All visitors should wear
safety glasses and be kept a safe distance from work area. Do not
let visitors contact tool or extension cord while operating.
h) Make workshop childproof with padlocks, master switches, or
by removing starter keys.
i) Don't force the tool. It will do the job better and safer at the feed
rate for which it was designed.
j) Use the right tool. Do not force the tool or attachment to do a job
for which it was not designed.
k) Use the proper extension cord. Make sure your extension cord is
in good condition. Use only a cord heavy enough to carry the
current your product will draw. An undersized cord will cause a
drop in line voltage resulting in loss of power and overheating. A
wire gauge size (A.W.G.) of at least 14 is recommended for an
extension cord 25 feet or less in length. If in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the
cord.
l) Dress properly. Do not wear loose clothing, neckties, or jewelry
that can get caught and draw you into moving parts. Rubber gloves
and nonskid footwear are recommended when working outdoors.
Also wear protective hair covering to contain long hair.
m) Always wear safety glasses with side shields. Everyday
eyeglasses have only impact-resistant lenses, they are NOT safety
4