Tecma X-light Manuel D'installation Et Maintenance page 45

Operation/installation/service manual
Manuale di utilizzo / installazione / manutenzione
X-light / Privilege / Evolution / Breeze / E-Breeze / Silence Plus / Elegance / Saninautico / Prestige
2.5.3.2
Temporarily disable the buttons in order to clean the Touch control panel.
1. Place your hand on the panel for 15 seconds (as shown in the figure) until the backlight starts
blinking.
2. Clean the panel with a cloth.
3. The buttons will be automatically enabled again after 15 seconds.
You can program the Touch panel to have the backlight:
a. Always on
b. Always off
c. Activated with a proximity sensor (default)
Instructions to switch from one program to another:
1. Press and hold the LED at the centre (Tank level LED)
2. While you hold the centre LED down, simultaneously press and release the BEFORE USE and
AFTER USE buttons. This way, you will switch from one program to another simultaneously 
ALWAYS ON  ALWAYS OFF  PROXIMITY
www.thetfordmarine.com
Manual rev 25.2014
Disabling the toilet for cleaning operations and Programming the backlight.
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy
/
MACERATOR TOILETS
TOILET MACERATRICI
©TECMA SRL
45