Options - IKEA Lagan Utilisation

Masquer les pouces Voir aussi pour Lagan:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Programme
Degree of soil
Type of load
1)
Normal soil
Crockery and
cutlery
Normal soil
Crockery and
cutlery
3)
1) The pressure and the temperature of the water , the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) This program is indicated for heavy soil loading to get the sufficient cleaning results on the pots and pans.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

Options

Acoustic signals
The acoustic signals operate when the ap-
pliance has a malfunction and it is not pos-
sible to deactivate them.
There is also an acoustic signal that oper-
ates when the programme is completed. By
default, this acoustic signal is on, but it is
possible to deactivate it.
How to deactivate the acoustic signal for
the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to "Setting
and starting a programme".
2. Press and hold Program until the pro-
gramme indicator
the programme indicator
with fixed light.
Programme
phases
Prewash
Wash 65 °C
Rinses
Dry
Prewash
Wash 50 °C
Rinses
Dry
starts to flash and
comes on
Duration
(min)
100 - 110
195
3. Press immediately Program.
The programme indicator
on with fixed light.
The programme indicator
to flash.
4.
Wait until the programme indicator
goes off. The programme indicator
continues to flash. The end indicator is
on.
5. Press Program. The end indicator goes
off. The acoustic signal for the end of
programme is deactivated.
6. Press the on/off button to deactivate the
appliance and to confirm the setting.
How to activate acoustic signal for the
end of programme
1. Refer to "How to activate the acoustic
signal for the end of programme" and
follow the procedure from step (1) to
step (4). The end indicator is off.
Energy
Water
(kWh)
(l)
1.2 - 1.6
15 - 16
1.02
15
comes
starts
7

Publicité

Table des Matières
loading

Table des Matières